Follow the simple steps below to fix iPhone stuck in headphone mode

pcbinary June 27, 2021 0 Comments

Why iPhone Is Stuck in Headphone Mode

Before we show you how to fix the iPhone/iPad stuck in headphone mode issue,let’s first learn why this occurs. It could have been one of the followingreasons: * Sudden or abrupt disconnection of headphones or speakers. * Disconnection of the speakers or headphones when your iPhone is busy. * Use of low-quality brand or incompatible headphones. * Damaged or faulty 3.5mm headphone jack.Having known the causes of iPhone stuck in headphone mode, read further tolearn how to fix the problem.

Fix 1: Plug the Headphones In and Out

To fix the situation whereby your iPhone/iPad stuck in headphone modebelieving that the headphones are connected, carefully plug in and unplug yourheadphones. Even though you’ve tried this many times, it is still worth ashot. Sometimes iOS can forget that your headphones were disconnected andassume that they are still plugged in.

Fix 2: Check Audio Output Settings

If the solution provided above does not resolve the iPhone stuck in headphonemode issue, then you have to check audio output settings. Recently, Apple hasenhanced the audio output settings by allowing users to choose where the audioshould be played to such as headphones, external speakers, the iPhone oriPad’s speakers, and HomePod. Consequently, the problem of iPhone stuck inheadphone mode may be solved through the audio output settings. Here’s how tocheck it: 1. On your iPhone, swipe up from the bottom of the screen to open the Control Center. 2. Now tap the music controls in the top right corner. Than tap the AirPlay icon which represented as three rings with a triangle in it. 3. In the menu that appears, if iPhone is an option, tap it to send the audio to your phone’s built-in speakers.

Fix 3: Clean the Headphone Jack

Another way to resolve iPhone stuck in headphone mode issue is by cleaning theheadphone jack. Your iPhone or iPad may think you have plugged in yourheadphones when it detects that there is something there. Just grab a cottonbud and use it to clean your headphone jack gently. Please avoid using a paperclip to clean lint out of the headphone jack.

Fix 5: Try Another Pair of Headphones

Also, it might be that iOS does not recognize your headphones again due topoor or low quality. Plug in another pair of headphones and unplug to checkthe result. If that does not resolve the iPhone/iPad stuck in headphone mode,then proceed to other solutions.

Fix 6: Restart iPhone or iPad

Even if you’ve tried another pair of headphones but you still find that youriPhone stuck in headphones mode, then what you can do is restart your iPhoneor iPad. There are quite a lot of problems you can solve by turning youriPhone off and back on again. Just restart your device to get rid of theglitch. Please note that how you restart your iPhone depends on what model youhave.

Fix 8: Update to the Latest iOS Version

Another effective fix for iPhone stuck in headphone mode water damage is tokeep your iOS updated to the most recent version, which will fix a lot ofsoftware related bugs and problems. Just follow these simple steps to get youriPhone updated: 1. On your iPhone, go to Settings and click on General. 2. Select Software Update and let your iPhone to check for any new updates. 3. If there is a new version, download and install it to fix your iPhone stuck in headphones mode.

Fix 9: Repair iPhone System

If none of the above solutions work for you, then something is wrong with youriPhone system. Then we recommend you use third-party tool like Fucosoft iOSSystem Recovery. Not only iPhone stuck in headphone mode, it can also fix manyother iOS system issues like iPhone stuck in Recovery mode, DFU mode, iPhonestuck in Boot Loop, Apple logo, iPhone is disabled, black screen, etc. withoutcausing any data loss.

Follow the simple steps below to fix iPhone stuck in headphone mode:

1. Download and install Fucosoft iOS System Recovery on your computer, and launch the program. 2. Connect your iPhone or iPad to the computer and choose “Standard Mode”, then click “Next”. 3. Wait a minute till the software detect your iPhone. If not, follow the instructions to put the device into DFU or Recovery mode. 4. After that, choose the firmware for your device and click “Download”. Then click “Start” to fix your iPhone or iPad stuck in headphone mode.

Clean the Headphone Jack

Many people keep their iPhones in their pockets, which are full of lint thatcan find its way into the headphone jack (or the Lightning port, on modelsthat don’t have a headphone jack). If enough lint or other gunk builds up, itcan block the connection between the headphones and the jack. If you suspectlint or other build-up is your problem: * Look into the headphone jack to check for lint. You may need to shine a light into the jack to get a good look. * If you see lint, blow into the headphone jack or shoot some compressed air into it (compressed air is better since it doesn’t have the moisture that’s present in breath, but not everyone has it handy). This may be enough to remove anything that’s built up in the jack. * If the lint is packed tightly and can’t be blown out, try a cotton swab. Remove most of the cotton from one end of the swab. Put a tiny bit of rubbing alcohol on the end you removed the cotton from. Then insert that end into the headphone jack. Move it around gently and try to pull out the lint. * If that didn’t work, or you don’t have a cotton swab, flatten out a paperclip. Wrap some tape around one end, being careful to not wrap so much that it’s larger than the headphone jack. Insert the tape end into the headphone jack and twist it a couple times. Gently pull it out, dispose of any debris, and repeat as necessary.If the headphone jack is clean but still not working, try fixing the problemin software as described in the next steps.While you’re cleaning, clean your headphones, too. Periodic cleaning willincrease their life expectancy and ensure they don’t carry harmful bacteriathat could irritate your ears.

Check Your AirPlay Output

One reason that you might not hear audio through your headphones is that youriPhone is sending the audio to another output. The iPhone is supposed toautomatically recognize when headphones are plugged in and switch audio tothem, but it’s possible that hasn’t happened in your case. One potential causeis that audio is being sent to an AirPlay-compatible speaker or AirPods. Tocheck for that: 1. Swipe up from the bottom of the iPhone’s screen to open Control Center (on the iPhone X and newer, swipe down from the top right). 2. Tap the AirPlay button in the top right of Control Center to reveal all available output sources. 3. Tap Headphones (or iPhone, whichever option is present). 4. Tap the screen or press the Home button to dismiss Control Center. With those settings changed, your iPhone’s audio is now being sent to theheadphones or the iPhone’s built-in speakers. If that doesn’t solve theproblem, there’s another, similar setting to investigate.

Check Bluetooth Output

Just like audio can be sent to other devices over AirPlay, the same thing canhappen over Bluetooth. If you’ve connected your iPhone to a Bluetooth devicelike a speaker, it’s possible the audio is still going there. The simplest wayto test this is to: 1. Open ​Control Center. 2. Tap the Bluetooth icon in the top-left group of icons so that it’s not lit up. This disconnects Bluetooth devices from your iPhone. 3. Try your headphones now. With Bluetooth off, the audio should play through your headphones and not any other device.

Leave a Reply

Your email address will not be published. Required fields are marked *