Pairing Taotronics Bluetooth Headphones to Your Computer

pcbinary June 27, 2021 0 Comments

Enable and Use Bluetooth in Windows 10

First off, your computer obviously needs to be Bluetooth enabled. If it’s not,an alternative is to install a third party USB Bluetooth Dongle. To find outif your computer has Bluetooth installed, press Windows key + X then clickDevice Manager. You should see Bluetooth listed in the device tree. Once youhave confirmed Bluetooth is installed, you can begin connecting devices.For the first example, I’m going to share files from my smartphone. UsingBluetooth is a lot easier than dealing with cables to connect your phone toyour PC. On some phones, Bluetooth can be a real battery drain. Unless youneed to use it all the time, I recommend leaving it turned off on your mobiledevice until you need it.When you want to copy pictures or files over to your computer, the first thingyou need to do is pair your phone with the computer.To do that, enable Bluetooth on your smartphone. Turning it on varies betweendevices. Here I am using a Nokia Lumia running Windows Phone 8.1. Bluetooth istypically in your device’s settings.On your Windows 10 device PC, go to Settings > Devices > Bluetooth. When yourdevice appears the Bluetooth window, click it then click Pair.UPDATE: Note that if you are using Windows 10 Creators Update or later, thesteps may be a bit different. Instead, there will be an “Add Bluetooth orother device” button that opens a wizard.Once you select your device to pair, you’ll be shown a passcode. Click yes toconfirm the passcode matches on both the phone and the computer.Wait a few seconds while both devices are paired.

Pairing Taotronics Bluetooth Headphones to Your Phone

I’m using the Samsung S10 (Android) as the phone in this guide. 1. Activate your Taotronics Bluetooth headphones’s pairing mode. For SoundLiberty 79, I just have to open the cover of the charging case and it will automatically go into pairing mode.The light indicators will flash blue and white when in pairing mode. 1. If that doesn’t work, you can try pressing the earbuds for ~ 10 seconds and you will hear a voiceover “Pairing”. 2. Go to Settings > Connections > Bluetooth. Scan for available Bluetooth devices. You should spot the headphones as an available device in the Bluetooth device list.If the headphones is in pairing mode, you should be able to see it in the Bluetooth device list. 3. Select the correct headphones and pair with it.You should be able to see the available wireless Taotronics headphones in the Bluetooth device list. 4. Your Taotronics Bluetooth headphones is now connected to the phone successfully.

Pairing Taotronics Bluetooth Headphones to Your Computer

I’m using the Macbook Pro as the computer in this guide. 1. Activate the Bluetooth headphones’s pairing mode. See the above steps for examples. 2. Click the Bluetooth icon in the menu bar. Navigate to the Bluetooth device list by clicking on “Open Bluetooth Preferences”How to go Bluetooth device list on Mac 3. The headphones that are in pairing mode should appear in the Bluetooth device list.Your Taotronics Bluetooth headphones should appear in the device list. 4. Click on “Connect”. 5. Your Bluetooth headphones is now successfully connected to the computer.Connected Taotronics Bluetooth headphones

Turn on Bluetooth on Your Computer and Device

First, ensure Bluetooth is enabled on your computer. Many laptops come withBluetooth support, but it may be disabled by default to save battery power.Often, you can find a button on your laptop’s keyboard that toggles Bluetooth.You might also have an icon in the System Tray at the bottom-right of thescreen or an option in your computer manufacturer’s included software.If your computer doesn’t have Bluetooth support (which is the case for manydesktops), you can buy a cheap Bluetooth adapter. This is a small USB donglethat provides Bluetooth access on any machine.Next, ensure Bluetooth is enabled on the device you want to pair with yourcomputer. Bluetooth is enabled by default on Bluetooth mice and headsets, butit may be disabled on smartphones and tablets.The exact location of this option will depend on your device.On Android, swipe down from the top of the screen twice to access QuickSettings, then make sure you have Bluetooth enabled. iOS users should openControl Center by swiping up from the bottom of the screen (iPhone 8 orearlier) or swiping down from the top-right corner of the screen (iPhone X orlater). Then tap the Bluetooth icon to enable it, if it’s not already.

2. How to Pair a Bluetooth Device to Windows PC

After you have enabled Bluetooth, you cannot use the other Bluetooth devicesdirectly with your computer. You need to pair them first. Only the paireddevices will be able to connect.So put your device such as phone, Bluetooth earphones, etc., in pairing mode.Then open Bluetooth Settings on your PC from Settings > Bluetooth & otherdevices. Turn on the toggle for Bluetooth. Then click on Add Bluetooth orother devices. Select the type of Bluetooth device that you want to add. In my case, it’sBluetooth audio. So I will go with the first option, i.e., Bluetooth. Your Bluetooth device will show up if it’s in the pairing mode. Click on it toconnect to it. Note: On some devices, you will be asked to verify the PIN.A confirmation screen will show up when the device is connected successfully.Click on the Done button to close the window. Similarly, you can pair otherdevices with your Windows 10 PC.

3. Use Bluetooth Device With Windows 10 PC

Pairing is a one-time process. Once a device is paired, it will connectautomatically with your PC when Bluetooth is enabled. If that doesn’t happen,you can manually click on the Connect button under your Bluetooth device inyour computer’s Bluetooth settings. Alternatively, click on the Connect option in the Action Center. YourBluetooth devices will show up. Click on Connect for the device. Tip: Use the Remove device button to unpair a Bluetooth device from yourcomputer.Once your Bluetooth device is successfully connected to your computer, you canbegin to use it, depending on its type. For audio devices such as Bluetoothspeakers, headphones, etc., Windows will automatically recognize them and useas default option. So if a Bluetooth headphone is connected, the audio will berouted through it automatically.If you connect to a device such as a phone from which you can transfer files,you need to open the File Transfer panel on your computer. For that, go toWindows Settings > Devices > Bluetooth & other devices. You will find Send orreceive files via Bluetooth option either at the bottom or on the right side.Click on it. Click on the Send or Receive files option depending on your need. If youchoose to Receive, you will be asked to choose your Bluetooth files’ downloadlocation.Tip: If you have already sent a file via Bluetooth and don’t remember itsdownload location, send another test file to find the Bluetooth folder’slocation.

How to Connect a Bluetooth Device to Your Windows PC

You can connect many kinds of Bluetooth devices to your computer such asphones, printers, speakers, mice and keyboards among others. Your computerneeds to have Bluetooth for this to work, but if it doesn’t, try using a USBBluetooth adapter to get Bluetooth.We’ll look at a few of the common devices you can connect to your computerrunning Windows 10 via Bluetooth.

Enable Bluetooth on Windows 10 Computer

To enable Bluetooth on Windows 10: 1. Click the Start button > Settings, to open the Windows 10 Settings OR Press Windows + 1 on your Keyboard to access the Settings panel. OR Click Search box on taskbar, type “settings” and press enter, from the resultslist select Settings. 2. Click Devices to open the panel with the list of available devices as displayed below. 3. Now click on Bluetooth in the left hand side pannel 4. To enable Bluetooth, toggle the Bluetooth slider to the On position. After enabling Bluetooth, your computer will automatically start scanning and list the Bluetooth enabled devices found. 5. Click on the device name to expand and view the Pair option as displayed in the illustration above. Select the device you want to connect and click Pair. 6. Before connecting, you will be prompted to confirm that the passcode is the same on both the devices. 7. Click Yes to confirm and connect both the devices via Bluetooth. After the connection is made you will notice the “Connected” label under the device name.You can click on More Bluetooth options to display a new window with theBluetooth device settings as shown in the following image. You can also addthe Bluetooth icon in your system tray to receive an alert for every connecteddevice.After connecting the devices, you can use the Bluetooth connection to send orreceive data.

Disconnecting a Bluetooth Device

Disconnecting a wireless device is easy and simple. To disconnect a device: 1. Press Windows + 1 on your Keyboard to access the Settings panel 2. Select Devices > Bluetooth. 3. Select the device to disconnect, and click the Remove device button and click Yes to confirm.

What Causes Bluetooth to Stop Detecting Devices Windows 10?

There are quite a few different things which can cause this problem to appearon Windows 10. We have decided to include the most common causes which canhelp you identify the correct way to resolve the problem. It can save you sometime and your nerves so make sure you check you check out the list below! * Bluetooth services not running – In the best-case scenario, your Bluetooth services may have been stopped for some unknown reason. Also, their startup type should be set to Automatic in order to start the services each time Windows boots. * Bluetooth drivers are faulty – Old or mismatching Bluetooth drivers are the biggest cause of the problem. Sometimes Bluetooth devices require drivers from the manufacturer and sometimes you can use the one provided by Windows. Either way, your driver needs to be replaced.

Pair PC/Laptop/other devices with the Smartphone.

Before starting the file transfer you will need to pair Windows basedComputer/Laptop with Smartphone. So for this turned on Bluetooth feature onboth devices. After enabling Bluetooth on both devices follow the simplesteps: * Click on Bluetooth icon on your PC/Laptop from the notification area. And choose “Open Settings” option. You will see Bluetooth Settings options. Now Tick the check box: “Allow Bluetooth devices to find this PC” and click on the “OK” button. * Now open your Smartphone or other devices, go to Bluetooth settings and Scan the Available Devices, Don’t forget to turn on Bluetooth. Once the PC/Laptop device appears in the Available Devices then tap on this to join the network. * As soon as you tap on device name, A Bluetooth pairing request will appear on both devices (Smartphone and PC/Laptop) with the same pairing code. * In the Smartphone, Tap on “Pair” or “OK” option (depends on the different device functionality). * And at the same time on the Windows PC/Laptop quickly click on the Add a device notification. Otherwise, notification will be hidden in few seconds. So click on the notification immediately. * And you will see “Compare the passcodes” dialog box on Windows PC/Laptop. Click on “Yes” button to pair the device.Also Check:

Pairing with Devices

The Bluetooth feature doesn’t make any changes to your computer, other thanconsuming your battery. However, it gives you the option to connect to variousBluetooth-enabled devices, such as headphones, earbuds, PCs, smartphones, andfitness watches.Connecting your computer to a Bluetooth device is as simple as finding it onthe list in the “Bluetooth & other devices” menu. Of course, the device needsset to pairing mode and must be discoverable. You can find the details on howto pair any Bluetooth device in its instruction manual—well, almost.To connect to a device, click on it from the list of discovered Bluetoothproducts, and then select “Connect.” The link should get established quickly.

Leave a Reply

Your email address will not be published. Required fields are marked *